2
SYSTEM REQUIREMENTS
Operating System Requirements:
Windows XP SP2 or SP3, Vista, Windows 7
Hardware Requirements:
Pentium 1 or higher
USB 1.1 or 2.0
30 MB of Disk Space or higher
16 MB of RAM or higher
SOFTWARE INSTALLATION
Insert the CD into the CD-ROM drive and a browser will auto-start. If the browser does not auto-start, click on the
Start button, select Run and run the setup.exe program for the appropriate drive. Select Programming Software
from the navigation bar and then click on the MPS link to start the installation process. The programming software
for the DTI, STI, DPT and RC/RD are located under Miscellaneous Software in the navigation bar.
Note: Be certain that the “Install KL-4 USB Driver” box is checked during the installation process.
PORT ASSIGNMENT
Open Windows’ Control Panel and go to Device Manager.
Open Ports (COM& LPT) to identify the port assignment issued by computer. Plug in the KL-4F programmer to
the USB port and the screen will flash and show the device location. See the example shown below.
Set appropriate comport selection in the MPS software as needed
