cycles.
Water remains
in bottom
A small amount of water (in sump area) is
normal.
This is necessary to keep the pump primed and is
drained automatically at the beginning of each
cycle.
Defective drain pump
Replace the drain pump.
Defective Check plate
Clean or Replace the Check plate
Defective One way valve
Clean or Replace the One way valve
Spotting or
filming on
glasses
(reposition of
food soil).
Detergent allowed to stand too long in the
dispenser or excessive amounts of
detergent are being used.
Instruct the customer on proper use of dishwasher
detergent. Refer to the
owner’s manual.
Improper loading of dishes, pots,
pans, and nesting of silverware.
Noisy pump
assembly.
Debris in bottom of tub sump area.
Clean out the sump area.
Pump parts were not properly installed.
Inspect the pump and correct and installation
errors.
Impellers are not properly shimmed or are
rubbing.
Use the shim guage furnished in the impeller seal
kit. When the seal is properly shimmed the
impellers will be in the correct operating position.
Poor
washability.
Clogged filter assembly.
Clean the filter assembly.
Dishware stop the sprayer
revolve the sprayer before wash.
Improper loading of dishes, pots, pans,
and nesting of silverware.
Refer to the owners manual.
Little detergent/rinse module
Select improper program
Defective detergent/rinse module
Replace the etergent/rinse module.
Defective spray arm.
Check spray arm for proper rotation.
Too little water fill.
See “Too little water fill” symptom.
Defective motor pump
Replace the motor pump
Poor drying of
dishes
Improper loading of dishes, pots, pans,
and nesting of silverware.
Instruct the customer on proper loading of the
dishwasher. Refer to the owners manual.
Select improper program
Defective dispenser
Replace the dispenser
Water leaks
from
dishwasher.
Too much water fill.
See previous symptom.
Defective tub seal.
Replace the tub seal.
Defective softener gasket.
Replace softener gasket.
Defective drain pump
Replace the drain pump
Dishwasher not level.
Level the dishwasher.
Soap suds leak from dishwasher.
Refer to use and care manual.
Loose hose clamps.
Tighten or replace hose clamps.
Loose heater element.
Tighten heater element mounting nuts.
Defective sump seals.
Replace the sump seals.
Motor and drain pump assembly not
seated properly with sump.
Remount the motor and drain pump assembly.
Defective Heater elements support
assembly seals.
Remount Heater elements support assembly.
