Part Name: 1 – motor pump assembly 2 – thermal resistor
3 – drain pump assembly 4 – sump 5 – check plate holder
6 – heater elements support assembly
7 – heater elements assembly
Removal and Installation
1. Take
off
cutlery basket
,
basket
and
filter system
.
2.
Remove
shell
.
(see shell removal and installation)
3. Take out two
corner boards
,
absorber sound
,
backboard
,
hollow plate
.
4. Remove tank assembly.
(see tank assembly removal and installation)
5. Pull out all terminals and housings of sump assembly; include two terminals for connecting
drain pump assembly, three locking terminals and one connector for connecting motor
pump assembly, two terminals for connecting heater elements, two terminals for connecting
heater elements support assembly. And unfix connector of thermal resistor. Remove nut
and take out a tooth lock washer and one ring terminal of heater elements assembly.
6. Remove one clamp for fixing connecting hose to check plate holder.
Sump assembly
2
1
3
5
4
7
6
Terminals
Terminals
Terminals
Ring
Terminal
Locking terminals
Connector
Connector