background image

The beer machine uses AC power supply of 110~120V/60 Hz. If the voltage 
fluctuation exceed the range of 110~120V

±

10%, it can cause faults or even 

damage of beer machine. Or it may result in indoor circuit overheat to cause fire. 
Then it should be equipped with automatic voltage regulator of over 750W for use.
When gas or other combustible gas is revealed, you should turn off the gas valve, 
and then open the door. At this time do not pull out the plug of beer machine and 
other electric appliance, so as not to cause fire by the spark.

Safety warnings

Electricity-related matters

Related matters for usage

10 A

Do not pull the power cord when pull the power plug of the beer machine. Grasp the
 plug firmly and pull out the plug directly. Don't pull the plug with wet hands. 

Please use the standard special three-hole power socket more than 10A,which 
should not be shared by other appliances.

To avoid danger, if the power cord is frayed or damaged, they must be replaced 
by professionals from the maintenance department of the manufacturer or the 
related department.

The power cord should be fixed at the back of the box instead of being exposed 
outsides and dangling to prevent accidents. Never damage the power cord. 
Avoid using them when the power cord is damaged or the plug becomes frayed.

The power cord plug and power socket should be fixed firmly, otherwise they 
may cause fire. Please see to it that the grounding pole of the socket should 
have reliable grounding wire.
Usually, we suggest that you should not use extension cord, and the power of 
the rated voltage is 115 V, the current more than 10 A. The Fuse (circuit breaker) 
should be 15 A.

Do not attempt to repair or replace any part unless your equipment is 
recommended by the manual model. The other services shall be kept by the 
qualified technical personnel.

Don't use water to spray or flush the beer machine. Besides, don't put beer 
machine in damp place which is accessible to water. do not affect the electrical 
insulation performance of beer machine .

Since folding cardboard and plastic film may cause choking danger, don't give 
the packing or other parts to children for fun ! Do not let children enter or climb 
beer machine to keep the children from the danger. 

Please pull out the plug in the case of power off and cleaning.

Please don't put weight in the top of beer machine. It is easy to cause the 
dropping of items and accidental injury.

Don't make the beer machine for pedal or support.

Related matters of abandoning

Beer machine contains combustible materials of refrigerant R134a. It should be isolated from the fire 
when abandoned. It can't be burnt, but should be processed by the professional recycling company, 
so that it can avoid harming the environment or causing other dangers.

Once beer machine fall into disuse, it should be placed on the shelf or somewhere beyond the reach 
of children to prevent children from being hurt.

Correct manipulation of the beer machine

Names of each component

Placement

Put the beer machine in smooth, flat and 
strong place indoors.

Remove all packing 
materials before using 
the beer machine. 

Avoid the direct sunlight, 
and keep away from heat 
sources such as stoves, 
heaters, and radiators.

The hot air from the side wall of beer machine
 must be able to exclude unrestrictedly. 
Otherwise, the compressor must improve 
power to increase the power consumption. 
Therefore, the distance between the beer 
machine, wall and the surrounding furniture 
cannot be less than 10cm.

Starting

For the first starting, please leave the beer machine alone about 2~3 hours to plug in.

Clean the chamber of the beer machine before the first operation (see the 
maintenance of beer machine ).
Please let the beer machine work 2-3 hours before putting the barrel beer into 
the beer machine.

beer tower assembly

upper cover guardrail

water box

Display and control 
device

Evaporator

Mixed ball valve

Beer barrels

Door

beer can bottom pad

compressor 
chamber cover

Control board device

CO  can supporter

2

CO gas cylinder

 

2

CO  regulator valve

2

Cabinet

Top cover

universal wheels

2

3

Summary of Contents for WHS-199BSS1










Reviews:

Related manuals for WHS-199BSS1