Midea VC-02A14S, User Manual

Page: 14 / 17

Product operation
Operation instructions
Note: the suction inlet should be always clear without being blocked, or
the motor will overheat and then result in accidents.
Power switch
The power switch is at two different positions; please press
“I” to turn on
the dust cleaner, and press “O” to turn off the dust cleaner.
Vertically use the product
Release the power cable and insert the plug into a 220V socket;
Insert the handle bar into the hand-held machine;
Select the correct accessory (flat suction head or the ground brush) and
connect the accessory to the suction inlet of the hand-held machine;
Press the power switch “I” to turn on the dust cleaner to clean your house;
After your work is done, press the power switch “O” to turn off the dust
cleaner and wind the power cable on the cable arrangement hooks.
Note: when you vertically use the product to clean your house, you can
directly use the suction inlet to clean dust without installing any
accessory.
Hold the product to use it
Release the handle lock block and remove the handle bar from the
hand-held machine, and the tighten up the handle lock block;
Select the flat suction head or the ground brush according to your
requirement, and then insert it into the suction inlet;
Press the power swi
tch “I” to turn on the dust cleaner, and then press the
power switch “O” to turn off the dust cleaner after your work is done, and
then store all accessories.
Note:
Note: when you hold the product to clean your house, you can directly
use the suction inlet to clean dust without installing any accessory.
4