Midea Split Type Room Air Conditioner, Owner'S Manual, Page: 8 / 14

6
AUTOMATIC OPERATION
ECONOMIC(SLEEP) OPERATION
DRYING OPERATION
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating(cooling/heating
models only), or fan only operation depending on what
temperature you have selected and the room temperature.
The air conditioner will control room temperature
automatically round the temperature point set by you.
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
The dry mode will automatically select the drying
operation based on the difference between the set
temperature and the actual room temperature.
The temperature is regulated while dehumidifying by
repeating turning on and off of the cooling operation or
only. The fan speed indicator will display AUTO and
low will be used.
When you push ECONO (SLEEP) button on remote
controller during cooling, heating(cooling only type without),
or AUTO operation ,
fan
speed
the air conditioner will automatically
increase (cooling) or decrease (heating) 1 per hour.
The set temperature will be steady 2 hours later. The fan
speed will be automatically controlled. This feature can
maintain the most comfortable temperature and save more
energy for you.
Cooling Cooling
Time
DRYING operation
Room
temperature
set temperature
Cooling Fan only Fan only
HOW THE AIR CONDITIONER WORKS
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directed on people.
Adjust the temperature to achieve the highest comfort level. Do not adjust the unit
to excessive temperature levels.
Close doors and windows on COOL or HEAT modes, or performance may be reduced.
Use TIMER ON button on the remote controller to select a time you want to start
your air conditioner.
OPTIMAL OPERATION
Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner
may be reduced and the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
Do not operate unit with horizontal louvre in closed position.
1
1
1 hour
1 hour
Set
Temperature
Cooling
1
1
1 hour
1 hour
Set
Temperature
Heating
ECONOMIC (SLEEP) operation
ECONOMIC (SLEEP) operation