Midea Split Type Room Air Conditioner Owner'S Manual Download Page 11

OPERATION TIPS

The following events may occur during normal operation.
1.

Compressor protection
The compressor can't restart for 3 minutes after it stops.

The indoor or outdoor fan stop running when defrosting (Cooling and heating models only).

only

from building material,

Protection of the air conditioner.

Anti-cold air (Cooling and heating models only)

The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in
one of the following three situations and the set temperature has not been reached.

A) When heating has just starting.

B) Defrosting.
C) Low temperature heating.

Defrosting (Cooling and heating models

)

Frost may be generated on the outdoor unit during heat cycle when outdoor temperature is low
and humidity is high resulting in lower heating efficiency of the air conditioner.
During this condition air conditioner will stop heating operation and start defrosting automatically.
The time to defrost may vary from 4 to 10 minutes according to the outdoor temperature and

the amount of frost buildup on the outdoor unit.

2.

A white mist may generate due to a large temperature difference between air inlet and air outlet

on COOL mode in an indoor environment that has a high relative humidity.

A white mist may generate due to moisture generated from defrosting process when the air

conditioner restarts in HEAT mode operation after defrosting.

3.

You may hear a low hissing sound when the compressor is running or has just stopped running.
This sound is the sound of the refrigerant flowing or coming to a stop.
You can also hear a low "squeak" sound when the compressor is running or has just stopped
running. This is caused by heat expansion and cold contraction of the plastic parts in the unit
when the temperature is changing.

A noise may be heard due to louver restoring to its original position when power is first turned on.

4.

This is a normal condition when the air conditioner has not been used for a long time or during first
use of the unit.

5.

This is caused by the indoor unit giving off smells permeated

from furniture,

or smoke.

A white mist coming out from the indoor unit

Low noise of the air conditioner

Dust is blown out from the indoor unit.

A peculiar smell comes out from the indoor unit.

9

6.

When indoor temperature reaches the temperature setting on air conditioner, the compressor will
stop automatically, and the air conditioner turns to FAN only mode. The compressor will start again
when the indoor temperature rises on COOL mode or falls on HEAT mode (For cooling and heating
models only) to the set point.

The air conditioner turns to FAN only mode from COOL or HEAT (For cooling and

heating models only) mode.

Summary of Contents for Split Type Room Air Conditioner















Reviews: