ENGLISH
12
How To Use The Basic Functions
●
Press the SET button to enter the function
setting, then press SET button or Temp
or
Temp
button to select the desired
function.
●
The selected symbol will flash on the display
area, press the OK button to confirm.
●
To cancel the selected function, just perform
the same procedures as above.
●
Press the SET button to scroll through
operation functions as follows:
Active clean ( ) g Sleep( )g Follow Me( )
Active Clean Function(
)
●
This function is used to clean the air
conditioner evaporator to prevent frosting.
●
When this function is turned on, the indoor
unit display window appears CL , after 20 to
45 minutes, the unit will turn off automatically
and cancel Active Clean function.
SLEEP Function(
)
The SLEEP function is used to decrease energy
use while you sleep (and don t need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
For the detail, see sleep operation in USER S
MANUAL.
Note:
The SLEEP function is not available in
FAN or DRY mode.
FOLLOW ME function( )(optional)
The FOLLOW ME function enables the remote
control to measure the temperature at its current
location and send this signal to the air conditioner
every 3 minutes interval.
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the remote
control (instead of from the indoor unit itself) will
enable the air conditioner to optimize the
temperature around you and ensure maximum
comfort.
