background image

1. Open the front panel.

Fig. 4.1

Fig. 4.2

2. Remove the air filter.

 Page 8 

   Care And 

Maintenance

Safety Precautions

• 

Contact an authorized service technician for 

repair or maintenance. Improper repair and 

maintenance may cause water leakage, 

electrical shock, or fire, and may void your 

warranty.    

• 

DO NOT

 

substitute a blown fuse with a 

higher or lower amperage rating fuse, as this 

may cause circuit damage or an electrical fire.   

• 

Make sure the drain hose is set up according 

to the instructions. Failure to do so could 

cause leakage and result in personal 

property damage, fire and electric shock.   

• 

Make sure that all wires are connected 

properly. Failure to connect wires according 

to instructions can result in electrical shock 

or fire.  

Unit Maintenance

  BEFORE CLEANING OR 

MAINTENANCE

• 

Always turn off your air conditioning system 

and disconnect the power supply before 

cleaning or maintenance.  

• 

 

DO NOT 

use chemicals or chemically 

treated cloths to clean the unit.

 

• 

 

DO NOT 

use benzene, paint thinner, 

polishing powder or other solvents to clean 

the unit. They can cause the plastic surface 

to crack or deform. 

 

• 

 

DO NOT 

wash the unit under running water. 

Doing so creates an electrical hazard.

 

• 

 

DO NOT 

use water hotter than 40°C (104°F) 

to clean the front panel. This can cause the 

panel to become deformed or discolored.

 

• 

Clean the unit using a damp, lint-free cloth 

and neutral detergent. Dry the unit with a 

dry, lint-free cloth.  

How To Clean The Air Filter

The filter prevents dust and other particles from 

entering the indoor unit. Dust buildup can reduce 

the efficiency of the air conditioner. For optimum 

efficiency, clean the air filter every two weeks or 

more frequently if you live in a dusty area. 

Replace the filter with a new one if it’s heavily 

clogged and cannot be cleaned.      

  WARNING: DO NOT REMOVE OR 

CLEAN THE FILTER BY YOURSELF 

Removing and cleaning the filter can be 
dangerous. Removal and maintenance must be 
performed by a certified technician.  

NOTE: 

In households with animals, you will 

have to periodically wipe down the grille to 
prevent animal hair blocking airflow.

  

Care And Maintenance

4

Press the claws on the right and left sides of 

the air filter down slightly, then pull upward.

Air Outlet 

Selection Switch

Summary of Contents for QSBPQ4U-020AEN



















Reviews: