background image

7

7

8

8

To set the Auto-stop time.

1. Push the TIMER button when the unit is 
    operational, only the Auto-stop feature can 
    be set.
2. For the air conditioner with 12 hours timer
    program feature, keep pressing the TIMER 
    button, each press will increase the selected 
    time by 1 hour increments, up to 12 hours.
    For the air conditioner with 24 hours timer
    program feature, keep pressing the TIMER
    button, each time you press the button, 
    the time increases by half an hour between 0 
    and 10 hours and by one hour between 10 
    and  24 hours.
3. After the desired time has established, wait 
    for about 10 seconds until the setting tem-
    perature revert back in the display window 
    of the air conditioner. This indicates the 
    program is set.

NOTE:

 To cancel the TIMER setting, push

the TIMER button until 0 hour is displayed on
the LCD window of the air conditioner.

SLEEP operation

1

Timer operation

Timer operation

Press the TIMER button can set the Auto-start
and Auto-stop time of the unit. The time can be
set in range of 0~12 hours or 0~24 hours 
depending on models.

NOTE:

 

To set Auto-start time, the unit must be in the

Off 

position.

To set Auto-stop time, the unit must be in the 

On

 postion.

To set the Auto-start time.

1. Push the TIMER button when the unit is off, 
    only the Auto-start feature can be set.
2. For the air conditioner with 12 hours timer
    program feature, keep pressing the TIMER 
    button, each press will increase the selected 
    time by 1 hour increments, up to 12 hours.
    For the air conditioner with 24 hours timer
    program feature, keep pressing the TIMER
    button, each time you press the button, 
    the time increases by half an hour between 0 
    and 10 hours and by one hour between 10 and 
    24 hours.
3.  After the desired time has established, wait 
    for about 10 seconds until the setting temper-
    ature revert back in the display window of the
     air conditioner. This indicates the program is 
     set.

Press this button to activate the Sleep 
mode. This function is available on COOL, 
HEAT or AUTO mode only and maintain the 
most comfortable temperature for you.
The Sleep mode program can be 
cancelled at any time during operation 
by again pressing the Sleep button.

TEMP

TIMER

SWING

FAN

SLEEP

POWER

MODE

1

TEMP

TIMER

SWING

FAN

SLEEP

POWER

MODE

1

TEMP

TIMER

SWING

FAN

SLEEP

POWER

MODE

Summary of Contents for MWF09HB4


















Reviews: