8
F. FILTER REPLACEMENT
Pull the handle
Take out the filter
Replace the filter
Lock the filter
Get the cover on
Long press RESET to
reset the reminder
Open the cover
4-38
℃
G. BASIC PARAMETERS
For the technical improvement of the product, the following parameters are subject to change
without prior notice, please refer to the nameplate of the product.
The purified water flow rate is tested when the environment temperature 25±2
℃
, water
temperature 25± 1
℃
and water inlet pressure 0.24 ± 0.02MPa.
Model
MU136-4
Purified water flow rate
Working pressure
Applicable water quality
Working temperature
1.2L/min
0.1-0.4MPa
Municipal tap water
H. DAILY MAINTENANCE
Maintenance is necessary for the daily use of purified water.
1. When cleaning the product, please do not use soap, detergent and strong volatile solvent such
as thinner, gasoline and alcohol, otherwise, it may possibly cause crack, scratch and color
changing.
2. Please do not directly spray water to clean the device.
3. Check if there's water surrounding the product, and identify if there's water leakage.
4. Check if the water outlet faucet is leaking.
5. Please turn off the the three way valve if not being used for long periods of time.
6. Do not put the product at an angle, horizontal or up side down.
7. Do not refit the joint and pipe of the device by yourself.
8. Do not keep the product working iin an environment lower than 0
℃
.
9. Do not expose the product and pipeline in direct sunlight.
C1 C2
Summary of Contents for MU136-4
Page 11: ......
