3
C. USE IT FOR THE FIRST TIME
The water purifying device should be installed by a professional technician or plumber.
Start/Stop the Device for Undersink
1. The installation technician shall
install, flush and test the device
according to the steps as listed
below.
Install
Flush
Test
2.Connect with water source,install the 1/4"
tubing on the valve, turn on the three-way ball
valve, supply tap water.
3.Connect tubing with three-way ball valve
to the “ Water In” port of the system.
Note:
1. It is advised to close the three-way ball valve, if not used for long periods of time.
2. Make sure you remove the Lock Clip when inserting the tubing. Reinstall the Lock Clip after the
tubing is inserted.
3.Install quick-fitting to the faucet.
4.Connect tubing with faucet to the “ Water Out”
port of the system.
5. Turn on the faucet, starts to filter water,
close the faucet and the device stops
filtering water.
Summary of Contents for MU136-4
Page 11: ......
