Midea MTWR45, User Manual

Page: 9 / 20

CONTROL FEATURES AND FUNCTIONS
8
4 Delay
Press this button to enable the delay start feature. Each press will
increase the delay time by 1 hour. Once 24 hours is reached, each press
will increase the delay by 6 hours until 48 hours is reached. To disable,
press the delay start button once when 48 is displayed. The
Delay light
will be off indicating that delay start has been cancelled.
5 Tub Clean
Press both Delay and Program buttons to active the Tub Clean
program. With a high temperature wash , it cleans the tub of detergent
residue, dirt and bacteria. Do not add any detergent or clothes to the
washer when using this program. It is recommended you perform a tub
clean after every 60 washes.
6
Program
Press this button to select from the 6 wash programs.
Normal - Quick - Delicate will be selected when the corresponding light
is solid
Bulky - Wool - Easy Iron will be selected when the corresponding light is
flashing
7 Temp
Press this button to select the water temperature used during a wash.
Temperature selection is available in Bulky and Normal wash programs
only. Choose between hot, cold and warm (both hot and cold lights will
be displayed to indicate warm).
8
Start/Pause
Press this button once a wash program has been selected to start the
program. Once a wash has begun, press this button to pause the
program. Press Start/Pause again to resume.
9
On/Off
Press this button to switch the washer on and off.
Press once to switch on. When finished a wash program, press to switch
off. When a wash program is complete (buzzer sounds 6 times) or not
started within 10 minutes, the washer will automatically switch off.
Note:
The clothes washer will automatically stop if the lid is left open once the SPIN cycle
begins. If this occurs, there will be a warning buzzer and error code displayed. The
clothes washer will not start a wash cycle if the selected water level can not be
reached. Please refer to Page 13 for troubleshooting instructions.
Auto Unbalance Adjustment
During a wash cycle, if the laundry is not evenly placed, the clothes washer will
sense it is unbalanced and attempt to correct itself. The clothes washer attempts to
correct the unbalanced laundry for approximately 1 minute by adding water and
draining. It will attempt to correct itself 2 times. If it is unsuccessful, an alarm will
sound and the laundry will need to be manually corrected and distributed around the
bowl.