Midea MTWR45, User Manual

Page: 14 / 20

13
TROUBLESHOOTING GUIDE
If the clothes washer does not perform as expected, malfunctions or an alarm is
sounding, please check the following list of possible solutions.
If a solution can not be found or the problem persists, please contact Midea service (refer
to page 14).
Do not, under any circumstance, dismantle the appliance yourself.
FAULT POSSIBLE SOLUTION
No water is flowing in
Ÿ
Check the power source is ON
Ÿ
Check if the circuit breaker has been triggered or fuse is not
burnt out
Ÿ
Check the water supply is in the open position and the water
pressure reaches the minimum required by the washer
Ÿ
Check the inlet hose has been installed correctly
Ÿ
Check the filter of the inlet valve is not blocked or obstructed
Ÿ
Check if the START / PAUSE button has been pressed
Not washing
Ÿ
Check the power is on and the circuit breaker has not been
tripped or the fuse burnt out
Ÿ
If the minimum water level is not reached
Ÿ
Check if delay start has been set
Not draining
Ÿ
Check the drain hose is not too high
Ÿ
Check the drain hose is not obstructed
Ÿ
Check the drain pump is not obstructed
Abnormal or not spinning
Ÿ
Check the lid is completely closed
Ÿ
Check that the laundry inside the drum has not accumulated
to one side
Ÿ
Check the laundry is evenly distributed
Ÿ
Check that the laundry does not exceed the rated capacity
Ÿ
Check the clothes washer is level
The following table is a list of the fault indicators and corresponding alarms.
DISPLAY CAUSE SOLUTION
Occurs when filling drum
with water takes more
than 16 minutes Check the water taps are
in the open position
Alarm is triggered when
the lid is opened after
delay start, spin cycle or
in child lock mode Close the lid.
Restart delay time if
necessary.
Triggered when
unbalanced Check the laundry is
evenly distributed around
the drum
Occurs when draining
takes too long Check the drain hose is
not kinked, obstructed or
placed incorrectly.
Note:
To stop the alarm,
open the lid. Close the
lid once the issue has
been remedied and
resume the wash
program.
If problems persist,
Midea contact
customer care when
convenient.