![background image](http://html1.mh-extra.com/html/midea/msw-7118p/msw-7118p_owners-manual_1791809006.webp)
Installation area
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, level surface
2.Sufficient ventilation
3.Keep far away from the heat resources such as coal or gas.
as
and Avoid direct sunlight
, Room temperature is above 0 C
•
wandering!
•
Stability is important to prevent the product from
Make sure that the product should not stand on the power cord.
Warning!
!
INSTALLATION
w
w
W
>
20mm
Change the position of the drain hose
Front
Drain hose
According to the installation site, the drain hose can also be
at the wash
side of the machine . The method is as follows:
The ex-factory installation position of the drain hose is located the spin side .
installed
at
1 Unplug the power cord and empty water in the drain hose
completely.
2 Spread a piece of soft cloth on the floor (e.g. a blanket)
and place the washing machine on it gently.
Take the drain hose out from the buckle at the spin side,
put it into the buckle at the wash side.
Hang up the drain hose kit.
.
.
3.
and
4.
Blanket
There are two ways to place the end of drain hose:
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not
kink or protract the drain hose.
•
If drain hose is too long, do not force it into machine as it will cause abnormal noises.
Trough
Hose
Retainer
Bin
d
M
ax
.1
00
cm
Warning!
!
Warning!
!
water trough
Under3m
Under 15cm
10
0c
m
M
ax
.
1.For lower drain system
2.For upper drain system
5