Service manual
- 36 -
9.12.4 Auto:
After an hour running under economic mode, the set temp will rise 1
,
℃
if it is under cooling mode;
the set temp will decrease 1
,if it is under heating mode; the set temp will be chang
℃
eless, if it is under
fan-only mode; the condition will be the same after the air conditioner running under economic mode
after 2 hours, and during the next time the set temp do not change. The total time is 7 hours, after 7
hours the unit stops.
9.13 Auto restart function
In case of a sudden power failure, this function automatically sets the unit to previous settings before
the power failure when power returns
This function is unavailable in force run mode.
9.14 Turbo mode
9.14.1 For 9K and 12K type only
9.14.2 Under cooling mode (except Force Cooling mode), the indoor fan motor will run in High speed
when receive the signal from remoter controller, and will get back to the presetting speed when receive
again.
9.14.3 The turbo mode will cancel and indoor fan motor will get back to the presetting speed when one
of following condition occur:
a. mode changed;
b. get into Force Cooling mode;
c. turn off the air conditioner;
9.14.4 Sleep mode is not available in this mode.
9.15 Ionizer (air clean) function
9.15.1 Ionizer (air clean) function is effected when the unit is working and controlled by the remote
controller.
9.15.2 This function is active when the unit received the signal from the remote controller first time and
inactive when received the signal again. Repeat this circle when received signal again.
9.15.3 This function is working only when the indoor fan is working.
9.15.4 This function will not stop when the working mode changed, and be inactive when the unit shut
down.
9.16 Follow me function
9.16.1 This function starts when the indoor unit received the signal from remote controller, and the air
conditioner is operated by the temperature information included in the signal and the set temperature.
In this mode, the indoor temperature sensor in the indoor unit is inactive.
9.16.2 When the indoor unit received the signal by pressing the button of remote controller, the buzzer
in indoor unit will sound once. And the remote controller will send the corrected signal automatic per 3
