Page 12
Ins
tallation
Ins
tructions
3
Installation Instructions
Your installation location should meet the following
requirements:
• Make sure that you install your unit on an even surface
to minimize noise and vibration.
• The unit must be installed near a grounded plug, and
the Collection Tray Drain (found on the back of the
unit) must be accessible.
• The unit should be located at least 30 cm (12”) from
the nearest wall to ensure proper air conditioning.
• DO NOT cover the Intakes, Outlets or Remote Signal
Receptor of the unit, as this could cause damage to
the unit.
Choosing the Right Location
30 cm
12 inch
12 inch
30 cm
Note About Fluorinated Gasses
• This air-conditioning unit is a hermetically sealed unit that contains fluorinated
gasses. For specific information on the type of gas and the amount, please refer to
the relevant label on the unit itself.
• Installation, service, maintenance and repair of this unit must be performed by a
certified technician.
• Product uninstallation and recycling must be performed by a certified technician.
• If the system has a leak-detection system installed, it must be checked for leaks at
least every 12 months.
• When the unit is checked for leaks, proper record-keeping of all checks is strongly
recommended.
NOTE
All the illustrations in the
m
anual are for explanation purpose only. Your
m
achine
m
ay be slightly different.
The actual shape shall prevail.
The unit can be controlled by the unit control panel alone or with the re
m
ote
controller. This
m
anual does not include Re
m
ote Controller Operations, see the
<<Re
m
ote Controller Instruction>> packed with the unit for details.
