Midea MLV41N1AWW, Owner'S Manual

Page: 12 / 16

Delay
Delay
Child lock
Eco
Washing a load of laundry
STEP 7: Unloading your laundry
- You can set a period time in hours to delay your washing operation.
- Press the “
Delay ” button once to enter the delay start setting
function with the digital displaying your last setting time or “0" for
initial setting with “
Delay ” light flashing .
- Press the “ Delay ” button every time, the delay start time in hours
displayed will change in sequence: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, then back to 0.
Or, you can press and hold the “
Delay ” button to quickly adjust the
setting time until your desired time displayed.
- Select your desired delay start time.
- When “
0 " is displayed, the Delay Start function will be cancelled.
- The “Done” light on the process bar will flash when your laundry
work has been finished.
- The washer will produce 6 beeps after the cycles done and the lid
will be unlocked.
STEP 5: Set Delay Start
Note: You can skip this step if you don’t want this function.
STEP 6: Start your washer
Now, it’s time to start your washer.
- If you have selected desired Delay Start time, the “Delay” light will
be ON and your washer will start count down the delay start time.
- If you don’t have any delay start setting or the delay start time has
been finished, the unit will start your selected program. The relavant
process light will flash accordingly.
Soak Wash Rinse Spin Done
Notes:
You can just press the “ Power ” button to turn your washer OFF and
then press again to turn it ON to cancel the Delay Start function.
- When you do so, you should reset your setting program.
Any time you pause the unit or open the lid, you should press the
“
Start/Pause ” button to resume the operation.
Useful functions
Operation Operation
Child Lock
This function is useful to prevent children from playing with the unit.
- Press and hold the “ Soil Level ” and “ Temp ” buttons simultaneously
for 3 seconds to activate this function. The red light “ Child lock ” will
turn ON .
- Press and hold the “ Soil Level ” and “ Temp ” buttons simultaneously
again for 3 seconds to deactivate this function. The light “ Child
lock ” will turn OFF .
- When this function is activated, all buttons will be out of function
except the
POWER and DEACTIVATE function above.
- You can just Power ON the unit and activate this function, then
Power the unit OFF. This operation will help to keep the child from
operating the unit. At this time, you should deactivate the function
next time when you want to operate the unit.
- When the
Child Lock function is activated with the top lid OPEN ,
the unit will display “ E3 " for lid open alarm. You should close the lid
in 20 seconds. The unit will alarm, display “ CL ” and drain all water
out of the tub if the lid keeps open over 20 seconds. You can stop
and clear the “
CL ” display easily by turning OFF the unit.
Soak Wash Rinse Spin Done
Notes:
- If you don’t press any button when you are setting delay start time
in 3 seconds, the washer will return to remaining time display for
selected washing program with “
Delay ” light ON . Press the button
“Delay” again will back to “ Delay ” setting with light flashing.
- If you want to change your cycle setting when you are setting delay
start time, just rotate the knob or press relative option buttons. The
display will change to remaining time for selected program with
“
Delay ” light ON.
- Any time you want to check the delay start setting, just press the
“
Delay ” button, the display will show the setting delay start time.
- Before you press the Start/Pause button, you can easily cancel this
function by changing the cycle selection with the knob. Then you
should reset all options as STEP 4.
-
THE DELAY START TIME CAN NOT BE CHANGED AFTER THE
PROGRAM HAS BEEN STARTED.
Buzzer
- Any time a button is pressed, you washer will beep once.
- When your washer finish a full cycle, it will beep 6 times.
- You can stop the beeping sound by pressing the “ Buzzer ” button
with the green light On .
- To resume the beeping, press the button again with the light Off .
Buzzer
Note: The beeping can’t be stopped when the unit is in ERR status.
You can power off the unit to stop the sound in ERR status.
Eco
- This function will reduce the energy consumption by reducing
washing time but increasing spinning time.
- A longer spinning time will help to reduce the remaining moisture in
your clothes so that you will cost less energy to dry them.
Detergent use
Your washer is designed to use high efficiency (HE) detergents.
- For best cleaning results, use a high efficiency detergents such
as Tide HE, Wisk HE, Cheer HE or Gain HE*. High efficiency
detergents contain suds suppressors that reduce or eliminate
suds. When fewer suds are produced, the load tumbles more
efficiency and cleaning is maximized.
- Reducing the amount of detergent may reduce the quality of
cleaning. It is important to pre-treat stains, sort carefully by color
and soil level, and avoid overloading.
* Brand names are trademarks of their respective manufacturers.
Regular detergent is not recommended. Use HE detergents
only.
WARNING
21 22
Delay