Midea MLE52N4AWW, User'S Manual & Installation Instructions

Page: 34 / 104

4
Signal
Press once to stop the sound . beeping
Press again to activate the sound.
Your selection will be kept until next pressing.
5
Wrinkle Care
Press once to add the Wrinkle Care step into the operating program.
Press again to cancel selection.
Wrinkle Care provides approximately 90 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling.
The load is already dry, and can be removed at any time during the
Wrinkle Care cycle.
6
Damp Dry Signal
This function is useful when you want to take some garments out for
ironing. The unit will beep 6 times when the moisture in the clothes is
good for ironing. At this time, you can take those garments out and
continue drying the other by pressing the “START/PAUSE” button
once.
NOTE: The unit will not stop operating if you don’t take those
garments out for ironing.
7
Time adjust
These buttons are effective only for Manual cycles. Push these buttons
to change the drying time you prefer. Push repeatedly to get your
desired drying time.
8
Control lock
Press the “Time Adjust-” and “Time ” together to activate the
Control lock function. Press again for another 3 seconds to deactivate
the function. All buttons except the “Power” will be out of function
when Control lock is activated.
9
My cycle
Press and hold for 3 seconds to remember your favorite drying cycle.
Press once to load your favorite cycle setting.
10
Eco Dry
Press to select the Eco Dry cycle. This function will reduce the
energy consumption by reducing drying temp but increasing
operation time.
Dry
er
Saf
ety
Oper
ation
R
equir
ements
P
arts and
F
eatur
es
Ins
tallation
Ins
tructions
Dry
er Use
A
p
p
e
n
d
ix
Dry
er Car
e
T
ro
u
b
le
sh
o
o
tin
g
3 4
A double beep means selection not available .