Midea MLE52N4AWW, User'S Manual & Installation Instructions

Page: 31 / 104

3
.
Preassemble a 4 inches
(
10.2cm
) el
bow to the next
4 inch
es
(
10.2cm
)
duct section, and secure all joints with duct tape. Be sure that the
male end of the elbow faces AWAY from the dryer.
Insert
t
he elbow/duct assembly through the side opening and press it
onto the adapter duct.
Secure in place with duct tape. Be sure that
t
he male end of the duct
protrudes 1.5 inches
(
3.8cm
)
to connect the remaining ductwork
.
Duct tape the knockout removed to the opening in the back of the dryer.
2
.
Press the tabs on the knockout and carefully remove the knockout for
the desired vent opening.
Press the adapter duct onto the blower housing of the dryer as shown
.
Option 2: Bottom venting
1 ''
(
3.8 cm)
Elbow
Duct
Tape
Knockout
Adapter
Duct
3 .
Insert the 4 inches (10.2cm
)
elbow through the rear opening and press
it onto
t
he adapter duct
.
Be sure that
t
he male end of the elbow faces down through hole in the
bottom of the dryer.
Secure in place with duct tape .
Duct tape the knockout removed to the opening in the back of the dryer.
Duct
Tape
1 / 2
Elbow
31
Dry
er
Saf
ety
Oper
ation
R
equir
ements
P
arts and
F
eatur
es
Ins
tallation
Ins
tructions
Dry
er Use
A
p
p
e
n
d
ix
Dry
er Car
e
T
ro
u
b
le
sh
o
o
tin
g