Midea MI60S, Instructions Manual

Page: 8 / 28

glass surface. The glass becomes hot only because the pan eventually warms it up.
2.4 Before using your New Induction Hob
 Read this guide, taking special note of the „Safety Warnings‟ section.
 Remove any protective film that may still be on your Induction hob.
2.5 Technical Specification
Cooking Hob
MI60S
Cooking Zones
4 Zones
Supply Voltage
220-240V~ 50Hz or 60Hz
Installed Electric Power
7200W
Product Size L×W×H(mm) 590X520X60
Building-in Dimensions A×B (mm) 560X490
Weight and Dimensions are approximate. Because we continually strive to improve our products we may
change specifications and designs without prior notice.
3. Operation of Product
3.1 Touch Controls
 The controls respond to touch, so you don‟t need to apply any pressure.
 Use the ball of your finger, not its tip.
 You will hear a beep each time a touch is registered.
 Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth)
covering them. Even a thin film of water may make the controls difficult to operate.
iron pot
magnetic circuit
ceramic glass plate
induction coil
induced currents
9