Midea MHT60BL, Instructions Manual

Page: 9 / 12

9
OLD ELECTRICAL APPLIANCE DISPOSAL
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed of
in the normal unsorted municipal waste stream. Old appliances must be collected
separately in order to optimize the recovery and recycling of the materials they
contain and reduce the impact on human health and the environment.
The crossed out “Wheeled Bin” symbol on the product reminds you of your
obligation, that when disposing the appliance, you need separately collect them.
Consumers should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
Dismantling LED light module
● Remove the grease filter, and carefully remove 2 screws from the front plate (a cross headed
screwdriver will be needed to remove the screws).
● Disconnect the terminal of LED light.
● Press LED light at the back of the front plate, and take the LED light out.
● Replace the light (commercially available LED light (max. 1.5 w).
Max Power Voltage Picture Light Cap ILCOS D Code
Round/ Diameter:
70 mm
1.5 W DC 12 V — — DSR-1.5-S-70
Reinstalling LED light module
● Press LED light in the front of front plate, and install the LED light onto the front plate.
● Connect the terminal of LED light and light leads.
● Carefully fasten 2 screws on the front plate, and reinstall the grease filter.