10
TROUBLE SHOOTING
Fault
Cause
Solution
Light is on, but
motor does not
work
The blade is blocked.
The capacitor is damaged.
Replace the capacitor.
The motor is damaged.
Replace the motor.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell may
be produced.
Replace the motor.
Both light and
motor do not work
Apart from the above mentioned, check the following:
Light is damaged.
Replace the light.
Power cord is loose.
Connect the cord as per the elec-
tric diagram.
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and seal with
glue.
Leakage from the connection of
U-shaped section and cover.
Take down U-shaped section and
seal with soap or paint.
Vibration
The blade, if damaged, can cause
vibration.
Replace the blade.
The motor is not tightly fastened.
Fasten the motor tightly.
The cooker hood is not tightly fixed.
Fix the cooker hood tightly.
Insufficient suction
The distance between the cooker hood
and the cooker top is too large.
Readjust the distance.
Too much ventilation from open doors
or windows.
Choose a new place to install the
appliance or close some doors /
windows.
Machine incline
The fixing screw is not tight enough.
Tighten the fixing screw and make
it horizontal.
The hanging screw is not tight enough Tighten the hanging screw and
make it horizontal.
Summary of Contents for MHT60BL
Page 4: ...4 DIMENSION Chimney A B 1 400 400 448 485 838...
Page 11: ......
