background image

MAINTENANC 

GREASE FILTERS

CLEANING METAL SELF-SUPPORTING GREASE FILTERS 

The filters must be cleaned every 2 months of operation, or

more frequently for particularly heavy usage, and can be

washed in a dishwasher.

Pull the comfort panels to open them.

Remove the filters one by one pushing them towards the back

side of the hood unit and simultaneously pulling downwards.

Any kind of bending of the filters has to be avoided when

washing them. Before fitting them again into the hood make sure

that they are completely dry. (The color of the filter surface may

change throughout the time but this has no influence to the filter

efficiency).

When fitting the filters into the hood pay attention that they are

mounted in correct position the handle facing outwards.

Close the comfort panel.

ACTIVATED CHARCOAL FILTER (RECIRCULATION VERSION) 

These filters are not washable and cannot be regenerated, and must be replaced approximately 

every 4 months of operation, or more frequently with heavy usage. 

REPLACING THE ACTIVATED CHARCOAL FILTER 

Open the comfort panels pulling them downwards.

Remove the metal grease filters

Remove the saturated activated charcoal filter.

Fit the new filters.

Replace the metal grease filters.

Close the comfort panel

REMOVE

REMOVE

FIX

FIX

9

Summary of Contents for MHC90CGSS













Reviews: