Midea MHC90CGSS, Instruction

Page: 6 / 12


Mark a point (3) on the horizontal line C , 13 0 (250 optional) mm to the vertical reference line.

Repeat this operation on the other side, checking that the two marks are on the same horizontal
line.
Fix the brackets (Optional):

Drill holes at the marked points with a ɸ10 mm drill bit.

Insert the Wall Plugs 11 into the holes.

Fix the hood fixing bracket
20
with 3 screws
10
(5 x 50) supplied with the hood.

Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) supplied with the hood.
Hook the hood body:

Open the panel.

Remove the Metal grease filter using the handles provided.

Hook the hood body to the bracket
20
.

Level the hood body itself.

From the inside of the hood body, fix the screws 10 to Wall Plugs 11 at the points (3) .

Fit the filter into the hood.

Close the panel.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.

To install a ɸ 120 mm air exhaust connection, insert the reducer
flange 3 on the hood body outlet.

Fix the pipe 4 in position using sufficient pipe clamps (not
supplied).

Remove possible charcoal filters.
Right Wrong
6