15
16
Cleaning and Maintenance of the washing machine
!
! Please keep the washer with neat appearance and perform correct
maintenance to prolong the service life of washer.
Make sure to pull out the power plug before the cleaning and maintenance.
Cleaning of water inlet hose joint
Unscrew and remove the water inlet hose joint from the washer and clean the filtering
screen of inlet valve with brush.
！
NOTICE
The special circulation water flow is designed for this washer, thus the flock powder
and flock residues will be automatically collected into the filtering bag. After application,
the user shall regularly clean the filtering bag to remove the flock powder and flock residues.
Detail operation methods are following:
Cleaning of filtering bag
Jack
Press it according to the arrowhead
point . And you can discharge the
frame of filtering bag.
Put the frame of filtering bag into the
two jacks and push into emphatically
as shown in figure above.
Don't use high foam detergent. Read the specific instructions on how to use the detergent.
DO NOT EXCEED STATED DOSE, OVER . Excessive detergent will cause too much
foam, will overflow from the unit, and will spend more time for rinsing. Washing powder may
gather and block the box, please pay attention to Clean.
Liquid detergent storage box.
Open the lid, Add the liquid
detergent into the Liguid
Storage box slowly.
Fabric softener storage box.
Open the lid, Add the softener into
the Softener Storage box slowly.
This box not used for auto-dosing.
Add Laundry powder in this box.
DO NOT EXCEED STATED DOSE, OVER .
How to use I-Add
Kind tips
1 First time use, the amount of auto-dosing maybe not sufficient.
2 It will be frozen when the temperature below 0
℃.
3 Please add detergent and softener liquid when the ADD lights alarm.
How to clean the I-Add box
The detergent and softener box may get stuck,(long-time no use)
You should clean the I-Add box:
1 Flush warm water into the box.
2 Press the power button to turn power on.
3 Press both the"option"and "wash speed".
4 Press "detergent" and "softener"to pump out the liquid.
5 Run a complete cycle of “Drum clean”to clean the drum.
I-ADD is a Auto dosing system, it will take right amount of detergent and softener.
You can also press the Detergent button to add more or less detergent according to the
soil level.
)
(I-ADD only apply to liquid detergent, softener. Don't add powder into the
I-ADD boxes.
