17
18
220-240V~50HZ
390W
10.0kg
10.0kg
X
X
580 640 990
42kg
0.03MPa
~0.8
MPa
E1
When the washer couldn’t work well, being abnormal or in alarm, please check and correct
it as follows.
Malfunction display and solutions
Causes
Solutions
Display
E2
E3
E4
F1-F8
Check the water tap is opened or not.
Check the water level sensor and
drain pump.
Closed the lid.
Manually balance clothes in the barrel
by hands.
Rated power supply
Input power of motor
Rated washing capacity
Rated spin capacity
Overall dimensions
Application water pressure
Weight of whole machine
Washing mode
Draining mode
Spin mode
Technical specifications
New water flow
Centrifugal spin
Identify usual trouble of washer
No
washing
Abnormal
draining
Abnormal
spin
List of faults and inspection
Faults
Inspection Items
No water
flows in
! If the power is off or the fuse is burned out.
! If the water supply is cut off or the water pressure is too low.
! If the inlet hose is properly connected and the water tap is opened.
! If the filtering screen of inlet valve is blocked by dirt.
! If the coil of inlet valve is damaged. (The slight electromagnetic
sound is normal phenomenon when the inlet valve is switched on)
! If the "Start / Pause" button is pressed after the power
switch is pressed.
! If the door lid is closed.
! If all clothing piled largely at one side of barrel or the clothing
is excessively placed.
! If the washer is not placed in stable condition or it is placed in
inclination state. (The ground is not flat).
! If the motor belt is loosened.
Note: During the de spin process, if washing are piled at one side of the spin barrel,
it will cause unbalance of spin barrel resulting in striking. At this moment, the
computer inside the washer will feel this unbalance phenomenon and will automatically
correct it ( fill in water Washing ). However, if unbalance situation is not removed after
continuous three corrections, which means the computer auto-correction can not
resolve the problem. Then the user has to manually and evenly place the clothing
inside the barrel to solve the problem.
If the washer can not work normally, or appear abnormal or alarms, please check and
correct as follows.
! If the water drain hose is placed very high.
! If the end of water drain hose is sealed in pond.
! If the internal rubber ring of drain valve is blocked by dirt.
! If the power is off or the fuse is burned out.
! If the power supply voltage is too low.
! If the water amount reaches to the required water level.
(The washer will not work if the water amount does not reach the
required water level)
! If it is set to "Delay" washing mode. (It will only start to work
until the reservation time reached)
Children-Lock Alarm if the cover lid open.
Power off 5 seconds and Restart.
Any other abnormal.
Any other abnormal.
1.power off 5 seconds and Restart. 2.submit repair.
1.power off 5 seconds and Restart. 2.submit repair.
The light of adding
detergent is on
Alarm if the detergent is not enough.
Add liquid detergent.
Alarm for abnormal water intaking.
Alarm for water drain has not finished.
Alarm for lid not closed before spin.
Alarm for washing stay at one side.
Gravity drain
