13
Cleaning the interior glass of the oven
The interior glass of the oven door can be removed: with the
door in the semi-open position, use both hands to remove the
glass.
After cleaning, refit the glass by proceeding in reverse order.
Note:
In some models, the glass is screenprinted. In this case, when
refitting the glass make sure the screenprinted part is legible
when the oven door is opended.
The interior glass of the oven
The interior glass of the oven door can be removed:
1 open the oven door completely.
2 flip the hinge hooks "A" outwards (see fig. 5B).
3 shut the oven door slowly until it reaches hooks "A",
making sure these are locked into slots "B" of the oven
door, as shown in fig. 5C.
4 with the door in a semi-open position, remove the screws
A and B and the profile C as shown in fig. 4.
5 use both hands to remove the glass as shown in figures 4.
6 after cleaning, refit the glass by proceeding in reverse
order.
Removal of oven door
In-depth cleaning of the oven becomes more convenient if the
door is removed following the instructions below:
1
open the oven door completely.
2
flip the hinge hooks "A" outwards (see fig. 5B).
3 shut the oven door slowly until it reaches hooks "A",
making sure these are locked into slots "B" of the oven
door, as shown in fig. 5C. Remove the glass FIg. 5A (only
for models where present).
4
Using both hands, push the oven door lightly inwards, to
enable the door hinges "C" to come away from the slots
"D" (see fig. 5D) and pull the door towards you until it is
released from the oven.
After cleaning it, reposition it correctly following the
abovesteps in the reverse order and flipping hooks "A"
inwardsbefore you shut the oven door (fig. 5E).
CAUTION:
Do not use rough or abrasive materials or sharp metal
scrapers to clean the glass doors of the oven since they may
scratch the surface and cause the glass to break.
WARNINGS
Before performing any repair or operation, switch the applian-
ce off and close the gas tap.
The manufacturer declines all responsibility for any damage to
persons, animals or things caused by failure to observe the
rules indicated above. In case it is necessary to repair or
replace the inside components, act as follows:
WARNINGS
Isolate the cooker from the electricity supply before attemp-
ting to replace the oven lamp.
The oven lamp used is of a special type withstanding high
temperatures. To replace it, act as follows: disassemble the
protecting glass (A) and replace the burnt lamp with one of the
same type. Reassemble the protecting glass.
AA
A
B
A
C
D
A
Fig. 5C
Fig. 5B
Fig. 5D
Fig. 5E
Fig. 4
B
A
C
The inner glass of the oven with fixing snap (only for the
models where is provided)
The inner glass of the oven door can be removed:
1 open the oven door completely.
2 flip the hinge hooks "A" outwards (see fig. 5B).
3 shut the oven door slowly until it reaches hooks "A",
making sure that hinges are locked into slots "B" of the
oven door, as shown in fig. 5C.
4 with the door in a semi-open position, press the two
buttons C on the upper profile , and extract the profile as
shown in fig. 4
5 use both hands to remove the glass as shown in figures 4.
6 after cleaning, refit the glass by proceeding in reverse
order.
