background image

P.06

P.07

Safety Precautions

Safety Precautions

-

  

The openings must not be obstructed by a carpet.

-

  

The exhaust air must not be discharged into a flue which 

     is for exhausting fumes from appliances burning gas or  
     other fuels.
-    The appliance must not be installed behind a lockable door,  
     a sliding door or a door with a hinge on the opposite side to  
     that of the washer dryer.
-    

The 

 washer dryer

 shall not beinstalled at a humid place.  

-    The household washer dryer isn't intended to be built-in.
-    

The washer dryer whose lid can be opended during water 

     extraction,that it takes 15s or more for complete stop of 
      water extracting chamber tub

.

  

      

  

     the items can become hot enough to catch fire. Piling, 
     stacking or storing oil-affected items can prevent heat from  
     escaping and so create a fire hazard.

 

If it is unavoidable that fabrics that contain vegetable or 

     cooking oil or have been contaminated by hair care products.
     be placed in a tumble dryer they should first be washed in  
     hot water with extra detergent - this will reduce, but not 
     eliminate, the hazard.
-    Adequate ventilation has to be provided to avoid the back 
     flow of gases into the room from appliances burning other 
     fuels, including open fires.
-

  

Do not dry unwashed items in the washer dryer.

-    Items that have been soiled with substances such as cooking 
     oil, acetone, alcohol, petrol, kerosene, spot removers, 
     turpentine,waxes and wax removers should be washed in

  

hot

 

with an extra amount of detergent before being dried  

     in the washer dryer. 
-    Items such as foam rubber (latex foam), shower caps,water 
     proof textiles, rubber backed articles and clothes or pillows 
     fitted with foam rubber pads should not be dried in the  
     washer dryer.
-    Fabric softeners, or similar products, should be used as 
     specified by the fabric softener instructions.
-    The final part of a  washer dryer cycle occurs without heat 
     (cool down cycle) to ensure that the items are left at a 
     temperature that ensures that the items will not be damaged.
-    Remove all objects from pockets such as lighters and  
     matches before use the appliance. 
-

  

WARNING: Never stop a washer dryer before the end of  

      the drying cycle unless all items are quickly removed and 
      spread out so that the heat is dissipated.

 

     

Summary of Contents for MFC70-DS1401

















Reviews: