22
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after
installation (see picture).
8.3
Cautions
1.
The ceramic cooker hob must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2.
The ceramic cooker hob shall not be mounted to cooling equipment, dishwashers and rotary dryers.
3.
The ceramic cooker hob shall be installed such that better heat radiation can be ensured to enhance
its reliability.
4.
The wall and induced heating zone above the work surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
8.4
Connecting the hob to the mains power supply
The power supply should be connected in compliance with the relevant standard, or a single-pole circuit
breaker. The method of connection is shown below.
1.
If the cable is damaged or needs replacing, this should be done by an after-sales technician using the
proper tools, so as to avoid any accidents.
2.
If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be
installed with a minimum gap of 3mm between the contacts.
Yellow/Green
Black
Brown
Blue
Yellow/Green
Black
Brown
Blue