Midea MDRB424FGF Series, User Manual

Page: 12 / 276

4.
Dismantle the bottom hinge , hole caps and screws , Install the bottom hinge shaft on other side of
the bottom hinge , then install the hinge on the other side.
shaft - ,
('.'" -
-
!i;J .,
- ,
u
shaft
.--> 7 - ,
C
screw
screw ca
hole cap
5. Dismantle the screws , sleeve pipe and stopper on the lower end cover of the two door bodies , and
install them successively on the other side of the door bodies (the stopper needs to be replaced from
the additional bag). Then remove the upper end cover of the cooler door and s
w itch the wire harness
with a sleeve pipe to the other side of the door body. Finally install the sleeve pipe of the upper hinge
on the cooler door
in the hole on the other side of upper end cover of the cooler door.
s lee ve pipe
s topp e r
s cre w
6.
Put the freezer door on bottom hinge , install the middle hinge , the screws and the screw hole c aps .
sc re w
middle hing
( The picture above is only for reference. The actual configuration w ill depend on
the physical product or statement by the distributor)
EN-9
A