Midea mdhp07, User Manual

Page: 6 / 20

TRANSPORT & INSTALLATION
5
Transport
Move cautiously. Do not grasp any salient parts of machine. The machine door can not be used as the
handle for delivery.
If the dryer can't be transported in upright position, tilt it to the right (container) side but not more than 30°.
Installation Position
1. It is recommended that, for your convenience, the machine is positioned close to your washing
machine.
2. The tumble dryer must be installed in a clean place, where dirt does not build up. Air must be able to
circulate freely all round the appliance. Do not obstruct the front air inlet or the air intake grilles at the
back of the machine.
3. The dryer should be placed on a firm and flat surface. An uneven surface may cause excess operating
noise or vibration and effect the performance of the dryer.
4. The feet must never be removed. Do not restrict the floor clearance through deep pile carpets, strips of
wood or similar. This might cause heat built-up which would interfere with the operation of the appliance.
Level Adjusting
Once in its permanent operating position, check that the dryer is
absolutely level with the aid of a spirit level. If it is not, adjust the feet
with a tool.
Power Supply Connection
1. Make sure that the voltage of the power supply is the same as the electric specification of the dryer.
2. Do not connect the dryer with the power connection board, the universal plug or socket.