background image

Safety 

Precautions

 Page 4 

 

 

 WARNING for Using R32/R290 Refrigerant

Do not use means to accelerate the defrosting process or to clean, other than those recommended by 

the manufacturer.

The appliance shall be stored in a room without continuously operating ignition sources (for example: 

open flames, an operating gas appliance or an operating electric heater).

Do not pierce or burn.

Be aware that the refrigerants may not contain an odour.

Compliance with national gas regulations shall be observed.

Keep ventilation openings clear of obstruction.

The appliance shall be stored so as to prevent mechanical damage from occurring.

A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds 

to the room area as specified for operation.

Any person who is involved with working on or breaking into a refrigerant circuit should hold a current 

valid certificate from an industry-accredited assessment authority, which authorises their competence 

to handle refrigerants safely in accordance with an industry recognised assessment specification.

Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance 

and repair requiring the assistance of other skilled personnel shall be carried out under the supervision 

of the person competent in the use of flammable refrigerants.

The appliance shall be stored in a room without continuously operating open flames (for example an 

operating gas appliance) and ignition sources (for example an operating electric heater).

Appliance should be installed, operated and stored in a room with a floor area according to the amount 

of refrigerant to be charged

For specific information on the type of gas and the amount, please refer 

to the relevant label on the unit itself.

 

Appliance should be installed, operated and stored in a room with a floor area larger than 4 m  .

Caution: Risk of fire/

flammable materials

Explanation of symbols displayed on the unit(For the 

unit adopts R32/R290 Refrigerant only):

WARNING

CAUTION

CAUTION

CAUTION

This symbol shows that this appliance used a 

flammable refrigerant. If the refrigerant is leaked and 

exposed to an external ignition source, there is a risk 

of fire.

This symbol shows that the operation manual 

should be read carefully.
This symbol shows that a service personnel should be 

handling this equipment with reference to the 

installation manual.

This symbol shows that information is available such 

as the operating manual or installation manual.

2

    

    

    

Summary of Contents for MDDM20





































Reviews: