Maintenance
Dust removal
Switch off the power supply and disconnect the power cord.
Remove the hose, and release the clamp by pulling the lower side of it on each side and take
off the upper case.
Take the filter guide and shake the filter for about 20 times to remove the clogging dust from
the filter cloth. When fluff remains excessively on the filter cloth, remove it by a brush.
Take off the filter and dispose of the dust in the tank.
Replace the filter to the tank, and set the upper case on the tank.
Press down the clamp of the lower side of it on each side.
Filter care
It is recommended that the filter is cleaned once or twice a year to ensure optimum suction
power:
1.
Empty the dust case as described in the previous section.
2.
Take off the filter ring from the filter packing.
3.
Wash the filter in tepid water or a neutral detergent. If detergent used, rinse it out
thoroughly.
4.
Allow the filter to dry naturally.
NOTE:
Avoid washing in boiling water and in a washing machine.
Avoid drying over a fire, in hot sunlight or in a tumble dryer.
If the filter is used when wet, suction is impaired and the motor may be damaged.
Vacuum cleaner body
Wipe with a soft cloth soaked with water.
specification
Model
VTD21A1
Rated voltage
220-240V AC
Rated frequency
50-60Hz
Input power(IEC)
1600-1800W
Input power(MAX.)
1800-2000W
Dust filter
Cloth filter
Dust capacity
21L
Cord length
5m
Net weight(kg)
5
Dimension L*W*H
370*336*535
Cleaning tools
Rug-floor nozzle
with
Extension pipe
Telescopic pipe
accessories
Crevice Nozzle/Dusting Brush
