![background image](http://html1.mh-extra.com/html/midea/mcs2025gb/mcs2025gb_instruction-manual_1791678011.webp)
Maintenance guide
Removing and cleaning the floor head and roller brush
Before starting any cleaning, ensure the
stick vac is not charging and is switched
off and remove the floor nozzle from the
rest of the stick vac.
If the roller brush becomes tangled
during use, the self-protect system will
shut off the stick vac. If that happens,
please follow below steps.
1.
Turn the floor brush head (I) upside
down. To access the roller brush, slide
the tab, marked with arrows, to the
right.
2.
Pull the roller brush at a slight angle
up and out of the floor brush head.
Any build up of hair etc. can now
be removed from the roller brush.
Scissors can be used to cut any hair
away from the roller if necessary,
taking care not to cut any of the
brush bristles.
3.
Once the roller brush is cleaned,
replace the roller brush by aligning
the left, open side of the roller with
the star cog shape on the floor
brush head. You may need to twist
the roller head a little to lock this in
place.
4.
Push the other end of the roller down
as far as it will go. Slide the tab back
to the left to lock in place.
1
4
2
3
I
11