background image

10

switch off the appliance. To unlock the control panel, press again on “lock” button during 3

seconds.

e) Switch off the appliance

After use, the electric hob is hot, the buzzer rings and the indicator « H » flashes on the

screen. To switch off the appliance, press on the On/Standby button

(7)

, then unplug the

socket.

Please, refer below table for wattage:

4) CLEANING AND MAINTENANCE

a) Cleaning the induction cooker

Switch off and unplug the appliance. Let it cool down before cleaning.

Regarding the glass-ceramic and the control panel:

Light dirt: clean with a soft wet cloth.

Oily dirt: clean with a soft wet cloth dipped with little toothpaste or neutral

detergent until the removal of residuals.

Note

: during the cleaning, never clean the surface of the induction cooker with a

rigid brush.

Regarding the air entry and the air vent

After a long time of use, some dust or other dirt may be accumulated at the air entry or air

vent. Use a flexible brush or a detergent to clean it. The body of the appliance can be

cleaned with caution with a dry cloth.

Note: never immerse the induction cooker in the water and do not maintain it with

a steam cleaner.

120 300 400 600 800 900 1000 1100 1300 1500

Summary of Contents for MC-RTW1505D














Reviews: