Page 47
Ins
truc
ciones
de Oper
ación
Operación de los botones
Botón ON/OFF
Pulse el botón
ON/OFF para
encender o apagar la unidad.
NOTA: La unidad iniciará
automáticamente la función Ahorro
de Energía en los modos Frío, Seco y
Automático.
Botón ECO
Pulse el botón ECO para iniciar la
función de ahorro de energía. Esta
función está disponible en los modos
Enfriamiento (COOL), Seco (DRY)
y Automático (AUTO) (solo AUTO-
COOLING y AUTOFAN). El ventilador
seguirá funcionando durante 3
minutos después de que el compresor
se apague.
A continuación, el ventilador se
enciende durante 2 minutos a
intervalos de 10 minutos hasta que
la temperatura ambiente quede por
encima de la temperatura establecida,
momento en el que el compresor
vuelve a encenderse y se reanuda la
refrigeración
.
Pulse el botón ECO por 3 segundos
para iniciar la función filtro. Esa
función es un recordatorio para
limpiar el Filtro de aire para una
operación más eficiente. El LED (la luz
arriba del botón) se iluminará después
de 250 horas de funcionamiento.
Botones
<
y
<
Pulse los botones
<
o
<
para cambiar
el ajuste de temperatura
.
NOTA: Pulse o mantenga pulsado el
botón
<
o el botón
<
hasta que
se vea la temperatura deseada en el
visor. Esta temperatura se mantendrá
automáticamente en cualquier lugar
entre 60°F (16°C) y 86°F (30°C). Si
desea visualizar la temperatura ambiente
actual, consulte la sección “Cuando se
opera en modo Solo Ventilador”.
Botón MODE
Para seleccionar el modo de
funcionamiento, pulse el botón MODE.
Cada vez que pulsar el botón, se
selecciona un modo en una secuencia
que va desde Calentamiento (HEAT),
Automático (AUTO), Enfriamiento
(COOL), Seco (DRY) y Ventilador
(FAN). La luz indicadora adyacente se
iluminará y permanecerá encendida
una vez seleccionado el modo. La
unidad encenderá automáticamente
la función de Ahorro de Energía para
los siguientes modos: Calentamiento,
Enfriamiento, Seco, Automático (solo
modos Auto-Enfriamiento y Auto-
Ventilador).
1
2
5
3
4
6
7
1
3
5
2
4
INSTRUCCIONES DE FUNCIONAMIENTO DEL CONTROL ELECTRÓNICO
Botón FAN
Pulse el botón Ventilador para
cambiar la velocidad del ventilador
entre cuatro ajustes: Automático
(Auto), Bajo (Low), Medio (Med) o
Alto (High). Cada vez que se presiona
el botón, se cambia el modo de
velocidad del ventilador.
Summary of Contents for MAW08HV1CWT
Page 61: ...Page 61...
Page 62: ......