1. Unfold the package and take out the air cooler,put it on the ground.
2. Check out the spare part.
3. Install the universal wheel: take out the universal wheel and install it on the air cooler.
(Fig.1)
4. Watering: Pull out the water tank from the body about 1/3, and pour water into the
water tank. If you want to pull out the water tank, please pull out after power-off 2
minutes.
Attention:
�*
Pay attention to the Water line when watering.
�*
When watering, the water must not be higher than the“MAX”water line. When
humidifying, the water must not be lower thanthe “MIN” water line.
*
If you want to increase the cooling e ffect, you can put the frozen ice box into the
water tank. (Fig.2)
5. Check the power cord to find whether it is same with the rating label.
6. Turn the power switch to “I”
Connect the power cord, and then turn on the power button.
Attention:
�*
Do not connect the power cord with a wet hand.
�
*
When remove the machine, please pull out the power cord.
�
*
When connect the power cord, please make it contact well.
Fig.1
wheels
water tank
Add water and
Frozen ice box
Fig.2
Prepare to Operate
Control board
ON/OFF
TIMER
NATURAL
SPEED
OSC.
ION
EVA. /
COOLER
Summary of Contents for MAC-200U
Page 8: ......