Flooded type water cooled screw chiller (PCB Control)
MCAC-CTSM-2012-11
36
non-existent date or time is not allowed, and we assume no liability or responsibility for setting
of non-existent date or time and consequence resulting from this setting.
Screen Setting
User can increase and reduce the brightness and contrast of screen by clicking on “+”and “-” in this
page.
User can also open and close the keypad tone of screen by clicking on “ON” and “OFF”.
User can modify the time of backlight by clicking on the numeric box following the time of backlight.
Electric control capacity displays the battery capacity of PCB whose battery is used for supplying power
for PCB interior time in the case of failure to engage PCB. Reset of PCB interior event will be resulted
from too long power-fail time of PCB module without battery.
Automatic On/Off
If the automatic on/off function is needed, please switch to “TIMED” mode in control mode (as shown in
Picture 2) firstly, then enter user parameters setting page, click on
button to enter
the following page ,and set the starting times and shutdown times.
Automatic On/Off Setting
Any time every day in a week can be selected, and the units will be started or stopped at the time points.
When a period of continuous running time (for example from 10:00 Tuesday to 16:00 Thursday) is
necessary, you can set the time 10:00 in starting time and 0:00 in shutdown time on Tuesday and click
Inching
switch
Manual Input
Is allowed
