Manul operation can be used temporarily in case you can not find the remote controller or
its batteries are exhausted.
4
Manual
control button
AUTO/COOL
AUTO/COOL
Manual
control button
OPERATING TEMPERATURE
MANUAL OPERATION
Open and lift the front panel up to an angle
until it remains fixed with a clicking sound.
Close the panel firmly to its original
position.
One press of the manual control button will
lead to the forced AUTO operation. If press
the button twice within five seconds, the unit
will operate under forced COOL operation.
This button is used for testing purposes
only. You had better not choose it.
To restore the remote controller operation,
use the remote controller directly.
CAUTION:
1
3
2
NOTE:
The unit must be turned off before
operating the manual control button. If the
unit is operational, continue pressing the
manual control button until the unit is off.
Mode
Cooling operation
Heating operation
Drying operation
Temperature
1. If air conditioner is used outside of the above conditions, certain safety protection
features may come into operation and cause the unit to function abnormally.
2. Room relative humidity less than 80%. If the air conditioner operates in excess of this
figure, the surface of the air conditioner may attract condensation. Please sets the vertical
air flow louver to its maximum angle (vertically to the floor), and set HIGH fan mode.
3. Optimum performance will be achieved within these operating temperature.
Room temperature
Outdoor temperature
>17 C
0 C
50 C
<30 C
-15 C
34 C
>10 C
0 C
50 C
CAUTION:
~
~
~
( -15 C
50 C:For the models with
low temperature cooling system)
~
