6）冷冻室温度设定
按冷冻温度调节键 ，冷
冻温区闪烁提示，再冷冻温度调节键 可
调节设定温度，
响一声蜂鸣声，设定范围-16~-24℃,按
键一次变化1℃，温度调节后，数码管闪烁5秒，
新的设定温度在锁定后生效。
6
）
Press temperature adjusting button of the freezing chamber
, quick freezing region will make
flashing
indication. Then press the button
again to set the temperature, and you will hear one
beep. Setting scope is between -16°C and -24°C. Every timeyou press the button, the temperature wil
l change 1°C. After adjusting, the digital tube will keep flashing for 5 seconds. New temperature setting
will
come into effect after locking.
Temperature setting of freezing chamber
5
）
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber
, cold storage region will make
flashing indication. Then press the button
again to set the temperature, and will hear one
beep. Setting scope is between 2°C and 8°C.Every time you press the button, the temperature will
change 1°C. After adjusting
,
the digital tube will keep flashing
for 5 seconds. New temperature
setting will come into effect after locking.
5）冷藏室温度设定
按冷藏温度调节键 ，
冷藏温区闪烁提示，再按冷藏键调节 设
定温度，响一声蜂鸣声，
设定范围
2 ~ 8
℃,按
键一次变化
1
℃；温度调节后，数码管闪烁
5
秒，新的设定温度在锁定后生效。
第
11
页
11
7
）断电存储
当发生断电情况时，瞬时工作状态会被锁定。这种状态可以保持到通电。
8
）开启提示操作和报警控制
，提示声响起。如果门在两分钟后还没有关上，蜂鸣器会响，之后每秒钟
响一次，直到门关上。按下按键取消蜂鸣报警。
9
）
故障指示
当
显示屏上出现以下提示时，表示冰箱出现故障。虽然冰箱在以下故障情况下仍然可以进行冷藏功能，但是用
户应联系维修人员，确保冰箱实现优化操作。
当冰箱门体打开时
7
）
Storage upon power failure
In case of power failure, the instant working state will be locked and maintained until re-electrification.
8
）
Opening warning and alarm control
when open the refrigerator doors, the opening music will play. If the door is not closed in two minutes,
the buzzer will sound once every minute until the door is closed. Press anyone button to stop the buzzer alarm.
9
）
Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator. Though
the refrigerator may still have cold storage function with the following faults, the user shall contact a maintenance
specialist for maintenance, so as to ensure optimized operation of the appliance.
通信故障
冷藏室温度传感器故障
冷冻
化霜传感器故障
室
环境传感器故障
冷冻
温度传感器故障
室
故障代码
E1
E2
E5
故障描述
E7
E6
Fault Code
E1
E2
E5
Fault Description
E7
E6
Communication error
Ambient temperature sensor error
Temperature sensor failure
Freezing defrost
detection
circuit error
sensor
Temperature sensor failure
of refrigerating chamber
of freezing chamber
