Quick Start
Washing
Water level indicator
Wash timer
Rinsing
-5-
-4-
PARTS IDENTIFICATION
1. Install the washing machine
2
. L
oad the laundry
detergent and water into
the wash tub
and add
3.
to set wash time
Turn the wash timer knob
4.
Lay down the drain hose and set
Wash-Drain selector to “Drain”
position to drain out wash solution
5.
the wash tub
Take out the laundry from
USAGE METHOD
Cabinet maintenance
Accessories
Water inlet hose
Water inlet: to supply water in the wash tub
Wash timer: to select appropriate washing time
Wash-Drain selector: To switch from washing to draining and vice versa.
• Normal: For light to moderately soiled clothes, light wash load (lesser clothes quantity and/or lighter fabrics)
• Heavy: For heavily soiled clothes, moderate to heavy washload (mid up to full load and/or thick fabrics)
Unit
Control Panel
Control panel
Wash cover
Pulsator
Base
Cabinet
F
Wash tub
rame
Power cord
Drain hose
0
3
6
12
15
9
Wash
Timer
Normal
Drain
Heavy
Wash-Drain Selector
Water inlet
Wash timer
Wash-Drain Selector
MAINTENANCE
The maximum gradient of the supporting surface for the machine should not exceed 2
º.
Do not tear down electrical wires and components in the machine by yourself.
There are holes on the base for ventilation. These holes shold not be blocked by foreign objects (carpets, etc.).
Never connect the grounding wire with the live wire, or it may lead to an electric shock.
If the power cord is damaged, it must be replaced by a qualified person to avoid hazard.
●
●
●
●
●
Notes
The washing machine uses alternating current with rated voltage and frequency. When voltage fluctuates
between -10% and 10% of the rated voltage, the machine can work normally. Connection mode of the
power cord of this machine is Y-shaped connection. Users should not detach or reconnect the wires by
themselves. If this part needs to be repaired, please contact the designated service center.
* For reference only; actual parts may vary depending on the model.
1. Connect the water inlet hose into the water inlet.
2. Lay the drain hose on the ground, close to the sewer.
3. Put the laundry into the wash tub, add detergent and water into
the wash tub. When water level reaches half of the desired level, turn
off the faucet and let the laundry soak in the solution for a couple
of minutes after which, fill up to the desired water level.
4. Set the desired wash time using the wash timer knob.
5. When washing is finished, set the Wash-Drain selector to “DRAIN”
position and drain the wash tub.
1. After draining the wash solution, set the Wash-Drain selector to normal or heavy position and then fill the tub
up to the appropriate water level.
2. Turn the Wash Timer knob to the desired time for rinsing (about 3 to 5 minutes)
3. Drain out the rinse water in the tub.
4. Repeat the process until the appearance of the water becomes clear.
After using the washing machine, wipe moisture and stain with a piece of
soft cloth. To avoid damage to the surface, do not use corrosive or volatile
chemicals.
After using the washing machine, never forget to disconnect the power plug.
