Test Run
INSTRUCTIONS
Machine body cleaning
CLEANING AND MAINTENANCE
3
Warm up
When the particulate matter sensor
enters the warm up state, PM2.5 numeri-
cal display shows " ---", and displaying is
normal after 10 seconds.
4
Operating
The purifier is powered on for the
first time and then enters the
automatic mode.
Be sure to turn it off before any maintenance, and cut off power.
Notice
Main machine
Wipe the machine body with a soft towel.
Air inlet grille
Open the air inlet grille, vacuum up dust with a vacuum cleaner, and wipe it with a
cloth.
7