![background image](http://html1.mh-extra.com/html/midea/em234gtq-s/em234gtq-s_instruction-manual_1791364018.webp)
14. Use Option Mode
This allows the user choose between various ways for the oven to operate.
1) Open the oven door and press "2" pad for 5 seconds. The buzzer sounds once and enter
this mode.
2)
displays "OP: - -".
3) Press any number button to enter related mode setting.
For example: to set the voice of the buzzer to medium. Press " 2 ", "OP:22" displays.
If you want to change, keep pressing "2",
displays "OP:20", "OP:21","OP:22","OP:23",
"OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
5) During setting process, press " " to enter Door Open Mode. Close the door will enter
Ready Mode.
6) If " " button not pressed at the last step, the program cannot be saved but stay at previous
way.
15. Service Mode
1) Open the oven door and press "3" pad for 5 seconds to enter service mode.
2)
displays "SE
".
3) To check the times of closing or opening the door, just press number button "3",
will display the times.
4) If press " 1 " pad for Tube Hours.
If press " 2 " pad for Tube Cycles.
If press " 3 " pad for Door Cycles..
If press " 4 " pad to Clear service information.
Only for some medels:
If press " 5 " pad to run Top Mag. Oven displays amps.
If press " 6 " pad to run Bottom Mag. Oven displays amps.
5) Press " " to enter Door Open Mode. Close the door will enter Ready Mode.
16. Factory-default setting
1) Press " " and " 0 ", the buzzer sounds once,and the screen wil l display "CHECK". I f i t is in the
factory-default setting,
will display " 11 ",after three seconds,
turn to the ready
mode
In the Ready Mode,pressing " " an " 0 " to factory-default setting.
d
the oven
. Press" "
If not in
to cancel the display ang back to ready back in the process of display.
the factory-default setting,
will display " 00 ", press" " to the factory-default setting,
will display " CLEAR ".
2) If do not press " " when the
display " 00 ",the setting will cancel.
the screen
The screen
the screen
the screen
The screen
the screen
the screen
screen
RVICE
Note:
actort-default setting
operation
restore all configure to f
.
Be careful in the
as it will
the buzzer sounds once, after self-testing,the screen will
display " "
11 or
" "
00 .
18
Summary of Contents for EM234GTQ-S
Page 21: ...Trouble shooting 21 ...