![background image](http://html1.mh-extra.com/html/midea/ce-bcd505we-st/ce-bcd505we-st_service-manual_1791504039.webp)
Service Manual
, 2016-12
38
/
51
10.Circuit description
10.1
Power Supply
AC input power would be reduced by SMPS control chip, then output stable DC12V and DC15V power after
treated by LC and filter. DC12V power is provided to relay (control strong electricity), internal lamp and control
panel, DC15V powers are provided to fan motor (voltage variation control the RPM of motor, lowest voltage is
8V). DC12V power is changed into DC5V power by regulator, to provide main control chip with power, monitoring
the temperature status of refrigerator
10.2
Test circuit for door switch
As show as above picture, take the door switch of refrigerator as example, the door switch is connected between
1 and 2 serially, when door is closed, the switch is in off-state, high-level be be detected at MCU port; when the
door is open, the switch is in on-state, low-level can be detected at MCU port. by high-level or low level detected,
Summary of Contents for CE-BCD505WE-ST
