![background image](http://html1.mh-extra.com/html/midea/ce-bcd505we-st/ce-bcd505we-st_service-manual_1791504030.webp)
Service Manual
, 2016-12
29
/
51
2)
Sensor in
refrigerating
chamber
Refer to the method of disassembling the freezer
compartment sensor.
3)
Sensor in
Variable
temperature
chamber
None
4)
Ambient temperature sensor
The sensor used for measurement of ambient
temperature is located within upper hinge cover of
refrigerating chamber door;
8.7
Compressor case
Rear cover and compressor case
1)Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2)Take the back cover plate of compressor chamber
upward.
,,.
Terminal box of the compressor
Remove the screws fixing block terminal, press the tap
on block terminal and take down block terminal cover
with flat-blade screwdriver.
Condenser fan motor
Condenser fan motor
None
Standby condenser
None
Piping system in the compressor case
Summary of Contents for CE-BCD505WE-ST
