Cleaning and Maintenance
Before cleaning the UV lamp, be sure to turn off the switch of vacuum
cleaner and unplug the power cord to prevent the vacuum cleaner from
being wiped under running conditions.
A cross head driver is used to remove the UV lamp cover plate screws
and take down the UV lamp cover plate. Gently wipe the surface of the
UV lamp with a dry towel; After cleaning, assemble them in the reverse
order of the disassembly.
UV lamp cover
plate
UV lamp tube
Wipe with a
towel
UV lamp cleaning
Notes
Charging Cable Storage
Please keep the charger bottom dry. Pay attention not to be affected by
water or any dirt in case of lowing down the user experience, and also
pay attention not to press hard or step the charger on feet.
While not using the charger, please keep the charging cable storage as
the picture shown.
Caution
Cleaning and Maintenance
Prompt
Parts cleaning
1. Be sure to turn off the switch button before taking out the dust cup;
2. Please pay attention to sharp objects like glass to prevent the
machine from being scratched;
3. All parts need to be completely dry before they can be installed.
4. Do not wash or apply brute force to the filter cotton;
5. Be sure to check whether the filter cotton is installed in place during
assembly;
6. Do not continue to use it when the filter cotton of the dust filter is
damaged or the cleaning & maintenance cannot be restored.
After cleaned and dried thoroughly, all parts are assembled in the reverse
order of the disassembly to prevent ash from leaking in the next use.
It is recommended to perform the above cleaning work after each dust
has been poured: After the filter cotton has been used for 30-50 hours
accumulatively, if the suction drops seriously, the cleaning cannot be
resumed. Please go to the designated place to purchase and replace it.
Notes
Cleaning and Maintenance
3. Take down the filter cotton and the cyclone cone, as
shown by the arrows.
4. Clean the dust cup: Flap the filter cotton (remember that not
to flap in reverse direction).
Cyclone
cone
Filter
cotton
Model
Noise
Capacity
UV Wave
Length
Rated
voltage
Rated
power
Flapping Frequency
/MINUTE
Size(L/W/H)
Net
Weight
Specification