![background image](http://html1.mh-extra.com/html/midea/65c-series/65c-series_service-manual_1791446032.webp)
29
6.13 Disassembly of rail bracket, slider, automatic clean fender
Step1: Remove the door from oven (please refer to Point 6.3.1), and put it horizontally on the
table.
Step2: Remove the screws connected the
rail bracket
and the cavity, and take it out from
the clipping hole.
Step3: Remove the
screws connected the
slider
and the rail bracket, and then disassemble
the slider.
Step4: Remove the screws connected the
automatic clean fender
and the cavity, and then
disassemble the fender.
Summary of Contents for 65C series
