![background image](http://html1.mh-extra.com/html/midea/65c-series/65c-series_service-manual_1791446021.webp)
18
6.3.3 Disassembly of flat door
(Type: 2 layers of glass, 3 layers of glass or 4 layers of glass)
Step 1: Remove the door from oven (please refer to Point 6.3.1), and put it horizontally on
the table.
Step 2:
Hold the door by hand on the bottom side of the inner glass, push the inner glass
down and pull the inner glass upward (See No.1, No.2 indicated in Fig), take the inner glass
out (See No.3 indicated in Fig). And then take the middle glass out (See No.4, No.5
indicated in Fig).
Step 3:
Use a screwdriver to remove the screws fixed the door frame up cover, and pull it out
(See the following left figure). Please pay attention to the buckles between the up cover and
the brackets (See the following right figure).
1
2
3
4
5
Summary of Contents for 65C series
