8
•Fixed temperature boiling water, no heat preservation operation steps:
(1) Turn on the power supply, the buzzer whistles, the light emitting diode lights
up about 1S and enters the standby mode, and displays the current water
temperature; the standby state is not operated for 5 minutes, then the screen
hologram;If boiling water is needed without heat preservation, jump to step (2);If
you need to boil water to the specified menu temperature for boiling water
without insulation (BOIL mode), jump to step (3);
(2) Standby status, directly press the #2 button, display 100 C 5 seconds, then
boil water, no heat preservation, after completion, buzzer sounds 3 times, into
standby status. (In standby mode, only real-time temperature is displayed, BOIL
and WARM are not displayed)
(3) In standby state, click the #1 button, select the menu, When the boiling
water.reaches the temperature value of the corresponding menu, the buzzer
sounds three times and enters the standby state. In the process of boiling water,
click the #2 button again and cancel the boiling water corresponding to the menu
to enter the standby state.
•Insulation and Warm function switching operation steps:
Long press 1 key to switch the mode of BOIL (i.e. no heat preservation) and
WARM (i.e. heat preservation). The default BOIL mode is used for the first time.
Memorize the settings of BOIL and WARM (that is, after shutdown, boot into
standby mode, click the #1 button, and remember the previous mode).
•Fixed temperature boiling water, heat preservation operation steps:
If you need to boil water to the specified menu temperature for boiling, thermal
insulation (WARM mode), the operation steps are as follows;
(1) If in WARM mode, jump directly to step (2), otherwise, switch to WARM mode
and proceed to step (2).
(2) In standby state, click the #1 button, select the menu, "M1 40 C", "M2 80 C",
"M3 90 C". After choosing the corresponding menu, click the #2 button to start
boiling water. If no #2 button is clicked, it will automatically enter the working
state for 5 seconds. When the boiling water reaches the temperature value of the
corresponding menu, the buzzer sounds 3 times, enters the heat preservation
state, the heat preservation ends, the buzzer sounds 2 times, enters the standby
state. In the process of boiling water and keeping warm, click M2 button again
and cancel the boiling water and keeping warm corresponding to the menu and
enter standby state.
(3) Warm mode, enter standby state, press #2 button directly, display 100 C 5
seconds, then boil water, no heat preservation, after completion, buzzer sounds 3
times, enter standby state. You need to remember the previous WARM mode,
that is, when you click the # 1 button, or in WARM mode. (In standby mode, only
real-time temperature is displayed, BOIL and WARM are not displayed)
•After entering the shutdown mode, click the 1 button or the 2 button to enter
Botton Function Description
